The DN-200 Series is the flagship product of the DisplayNet AV-over-IP product line. It leverages the latest SDVoE technology to distribute uncompressed AV signals with resolutions of up to 4K /60p (4:4:4) over a 10GbE Ethernet network. The DN-200 Series offers support for HDMI 4K /60p with up to 12-bit color, HDCP 2.2, DisplayPort 1.2, as well as High-Speed USB 2.0 with virtual hub support. A high-performance scaler in both the Transmitter (Tx) and Receiver (Rx) units enables very Fast Switching, Advanced MultiViewer, and Advanced Video Wall processing.

The TX unit accepts multiple source signals including HDMI (with embedded audio and HDCP), DisplayPort, analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link and are distributed to destinations using an off-the-shelf 10GbE network switch. The DN-200 Series supports twisted pair (CAT6a or CAT7) media up to 328 ft. (100 meters), as well as Fiber Optic media using an industry standard SFP+ module supporting extension distances up to 30 KM (18 miles). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of Rx units, which convert the packetized 10GbE data to AV output signals at the destination in real time without introducing frame latency or any loss of image quality.

The DN-200 Series distributes video with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) without image artifacts and without frame latency. When the video signal exceeds the bandwidth limits of 10GbE, very light compression (maximum ratio of about 1.4:1) is used. Video signals may be routed in Point-to-Point, Matrix Switching, Video Wall, and MultiViewer modes all in the same system. For optimum flexibility, each signal layer (Video, Embedded Audio, Downmixed Audio, Analog Audio, IR, RS-232, and 1GbE) can each be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and downmixing. The DN-225UD-TX supports Dante^® digital audio, which can send Analog Stereo Audio, as well as de-embedded or downmixed HDMI audio to any Dante device using the 1GbE LAN Port.

DN-200 Series transmitter and receiver units are controlled by a DisplayNet Server^® (DNS-20), which includes a powerful DisplayNet API Engine and DisplayNet Manager^® web browser-based software that enables the system to be managed using any third-party controller using simple Telnet commands.

• Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
• Supports HDMI 4K /60p signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0)(1)
• Includes scaling in the Receiver to enable Fast Switching
• Vastly superior to conventional Video-over-IP products by providing: zero frame latency, zero compression(1), zero image artifacts
• Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, Dante Digital Audio (DN-225UD-TX only), High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
• Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, Dante Digital Audio (DN-225UD-TX only), USB, IR, RS-232
• Supports Audio Embedding, De-embedding and Downmixing
• Enables custom video wall configurations with optimized bezel correction and asymmetric wall support, for wall arrays of up to 8x8
• Supports fully customized MultiView layouts and configurations with a simple drag-and-drop interface
• Powerful built-in script editor enables creation of Scripts and Presets, greatly reducing the time needed for system set-up and configuration
• Supports advanced EDID Management, including the display of detailed EDID information and an integrated library for EDID storage and retrieval
• Unconstrained scalability – Size of I/O array only limited by number of 10GbE switch ports
• Support for both copper and fiber 10GbE network connectivity within the same unit
• Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable
• Maximum range up to 30 KM (18 miles) using single-mode SFP+ Module
• DisplayNet Server and DisplayNet Manager enable deep integration into new or existing AV systems
• Includes a built-in 1GbE Ethernet switch on all models (except DN-225UD-TX) for high-speed local network connections

• Leverages decades of proven networking technology and massive global deployment of 10GbE networks
• AV assets no longer need to be aggregated at a central location using an expensive AV Matrix Switcher
• Enables IT Managers to easily manage and distribute AV assets within corporate network environments
• Scalable – system array limited only by the number of installed endpoints and size (ports) of 10GbE network
• High-speed uplinks on many 10GbE switches allow increased port capacity without obsoleting existing hardware
• Capable of concurrent Video Wall, MultiViewer, and Matrix Switching operation – supports diverse range of applications
• Simple Installation – DisplayNet auto-configures all connected devices even in the most complex networked systems, thus eliminating the need for complicated device configuration