DisplayNet DN-300 Models
DisplayNet® DN-300 Series
Models
- DN-300 DisplayNet SDVoE Transmitter / Receiver
- DN-300H DisplayNet SDVoE Transmitter / Receiver USB HID
- DN-300 DisplayNet SDVoE Transmitter / Receiver
- DN-300H DisplayNet SDVoE Transmitter / Receiver USB HID
Pricing: Call for a quote or demo
DisplayNet®
DN-300 Overview
Unmatched Performance and Value – The DisplayNet® DN-300 Series represents a major breakthrough in performance, versatility, and value for AVoIP applications. Based on the latest SDVoE technology, the DN-300 Series delivers flawless HDMI video distribution with limitless scalability, zero-frame latency and zero image artifacts. These units support near-seamless switching and distribution of HDMI signals with resolutions of up to 4K/60p (4:4:4) with 8-bit color, or 4K/60p (4:2:2) with 10-bit or 12-bit color. Like other DisplayNet products, the DN-300 Series provides independent multi-layer routing of HDMI audio and video signals, as well as bidirectional Analog Audio, USB, IR, RS-232, and 1GbE Ethernet.
Feature Rich – DN-300 units provide a host of unique features, such as switchable Transmitter / Receiver operation, PoE+ support, and dual (copper / fiber) network interfaces that enable signal extension distances of up to 100 meters (328 ft.) with CAT-6A twisted pair, and up to 30 KM (18.6 miles) with single-mode fiber. The DN-300 includes auxiliary H.264/5 video output streams that provide support for viewing source thumbnails and for remote viewing / recording with resolutions of up to 1080 /30p. Furthermore, these units provide silent, fanless operation, powerful network security features, and versatile KVM Routing with full-bandwidth USB 2.0 on the DN-300 and rapid USB HID device switching on the DN-300H.
DN-300 units are housed in ultra-compact, low-profile cases that allow up to 4x units to occupy a single 1U of rack space. This makes them ideal for high density applications where rack space can be limited. Like all DisplayNet units, they include advanced, software-defined MultiViewer and Video Wall engines that enable a wide range of applications without the expense and complexity of ancillary products.
Limitless Expandability – Unlike traditional matrix switchers, DisplayNet systems have no limits or restrictions on the size or design of an AV distribution system; the matrix array can be as large as the number of non-blocking ports on the network. Stacked switches enable very large systems with several hundred ports, at a low marginal cost.
Exceptional Versatility – The DN-300 Series utilizes DisplayNet Server®, which provides a highly intuitive web-based UI and a powerful API that makes setup and maintenance of these units incredibly fast and easy. Highly advanced features enable effortless integration with third-party controllers as well as full interoperability with other SDVoE products. Thanks to its ultra-compact, low-profile design, exceptional capabilities and outstanding array of features, the
DN-300 Series enables system designers to develop and implement highly versatile AV signal distribution systems with robust performance and scalability at a very competitive price.
Features
- Silent, Fanless operation
- Switchable Transmitter / Receiver operation
- Includes dual (copper / fiber) 10G network interfaces
- Includes two independent H.264/5 video output streams
- Versatile KVM routing with full-bandwidth USB 2.0 support
- Supports PoE+ (802.3at) over the 10GbE RJ-45 connector
- Long Range – up to 100 meters (328 ft.) using CAT-6A cabling, up to 30KM (18.6 miles) using single-mode optical fiber
- Highly Scalable – supports systems from a few ports to hundreds; only limited by the size of the network switch
- Supports HDMI resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10 or 12-bit color (4:2:2 or 4:2:0); supports HDCP 2.2
- Independent multi-layer routing for HDMI Video, HDMI Audio, bidirectional Analog Audio, USB, RS‑232 and IR
- KVM Support – DN-300 offers full-bandwidth USB 2.0 routing, whereas DN-300H allows for instant switching of USB HID devices at a reduced cost and with advanced software features.
- Ultra-compact case – up to 4x units can be mounted in 1U rack space; horizontal and vertical Rack Mount Kits are available
Benefits
- Leverages decades of proven networking technology and massive global deployment of 10GbE networks
- AV assets no longer need to be aggregated at a central location using an expensive AV Matrix Switcher
- Enables IT Managers to easily manage and distribute AV assets within corporate network environments
- Scalable – system array limited only by the number of installed endpoints and size (ports) of 10GbE network
- High-speed uplinks on many 10GbE switches allow increased port capacity without obsoleting existing hardware
- Capable of concurrent Video Wall, MultiViewer, and Matrix Switching operation – supports diverse range of applications
- Simple Installation – DisplayNet auto-configures all connected devices even in the most complex networked systems, thus eliminating the need for complicated device configuration
Note 1: Video signals will be transported uncompressed unless the bandwidth exceeds the limits of 10GbE. For video signals that exceed 10Gbps. of raw data, light compression is employed. For the maximum resolutions shown above, a compression ratio of about 1.4:1 is used.
| Supported AV Signals | |
| Video | HDMI 4K /60p |
| HDCP | Supports HDCP 1.4 / HDCP 2.2 |
| Color Space | RGB, YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| HDR Support | HDR, HDR 10, HDR10+, Dolby Vision, HLG (only in Genlock Mode) |
| H.264 / H.265 Output Streams | Primary Stream: supports H.264 / H.265 encoded streaming video in Transmitter Mode with output resolutions up to 1080/30p, also supports 4K/60p downscaling. Adjustable bit rates from 1–20 mbps. Secondary Stream: supports H.264 / H.265 encoded streaming video in Transmitter Mode with output resolutions up to 540/30p, also supports 4K/60p downscaling, Adjustable bit rates from 128–2048 kbps. |
| Thumbnails | Supports PNG thumbnails with 180 lines of vertical resolution at 1 frame per second when used in conjunction with DisplayNet Server® (DNS-20) |
| Embedded Audio | Supports pass-through of embedded HDMI audio including up to 8 channels of LPCM or HBR audio formats such as: Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD, DTS:X |
| De-Embedded Audio | Supports independent routing of de-embedded HDMI audio: Up to 8 channels of LPCM digital audio with up to 24-bit depth and 192 kHz sampling rate |
| Downmixed Audio | Supports independent routing of 2-channel de-embedded / downmixed HDMI audio. Requires input signal to be PCM audio format |
| External Audio | Supports independent bi-directional routing of analog stereo audio converted to PCM with 24-bit depth and a fixed 48 kHz sampling rate |
| Ethernet | Built-in 1GbE Ethernet switch on all Tx and Rx units supporting 10 Mbps. up to 1 Gbps. |
| USB Control | DN-300: Supports switchable High-Speed USB 2.0 (480 Mbps.) extension with virtual hub functionality, with up to 7 RX units per TX unit DN-300H: Supports USB HID device extension and routing with instant switching and advanced software features |
| IR Control | Supports bidirectional IR switching |
| RS-232 Control | Supports bidirectional RS-232 switching via UART interface with up to 115,200 baud |
| Connections / Indicators | |
| 10GbE Port (1) | 1 ea. shielded RJ45 connector with LED indicators, and 1 ea. Fiber Optic SFP+ slot (populated with SFP+ module sold separately) |
| HDMI Input / HDMI Output | 2 ea. 19-pin Female HDMI connectors |
| Analog Stereo Audio Input / Output | 2 ea. 3.5mm Stereo Mini-Jacks |
| 1GbE Port | 1 ea. shielded RJ45 connector with LED indicators, bridged to 10GbE network |
| USB | USB Host: 1 ea. USB Type B connector USB Devices: 2 ea. USB Type A connector |
| RS-232 | 1 ea. 4-pin, 3.5mm pitch, Phoenix connector |
| IR Control |
IR IN: 1 ea. 3.5mm Stereo Mini-Jack IR OUT: 1 ea. 3.5mm Mini-Jack |
| DC Power | 1 ea. 5.5 mm / 2.1 mm female screw-locking connector |
| Front Panel Controls | 1 ea. Reset push-button to restore factory default values 1 ea. Mode Switch push-button to switch between TX and RX operating modes |
| Front Panel LEDs | Power, Status, Link, Video, USB, TX Mode, RX Mode |
| Performance | |
| Supported Resolutions (2) | Up to 4K /60p with 8-bit color (4:4:4) Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) |
| Maximum Pixel Clock Freq. | Supports pixel clock rates up to 600 MHz |
| Maximum Video Bit Rate | Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. Total |
| Switching Layers | Independent switching layers for all connected Video, Embedded Audio, Analog Audio, HDMI and Downmixed Audio, RS-232 and IR |
| Video Signal Latency (3) |
Genlock: ≤ 30 μsec. (uncompressed), ≤ 120 μsec. (compressed) (3) Genlock Scaler: 3.0 msec. Fast Switch: 1–2 Frames Video Wall: 1–2 Frames MultiViewer: 1–2 Frames |
| Supported I/O Switching Array | Size of I/O array is only limited by the size (number of ports) of the 10GbE network switch |
| Recommended CAT Cable | CAT-6A S/FTP (500 MHz) AWG 23, or CAT-7 (Europe); Compliant with TIA/EIA-568B termination standard |
| Maximum Cable Distance | Up to 328 ft. (100 meters) using CAT-6A S/FTP (500 MHz) AWG 23 cable Up to 30 KM (18 miles) using SMF SFP+ optical modules |
| HDMI Input Cable Equalization | Supports DVIGear's HR™ Series HDMI with cable lengths up to 10 meters at 4K /60p resolution |
| Operational Modes (4) | |
| Operating Mode | Switchable between TX and RX Operating Modes – either by front panel control or API command |
| Matrix Switching Mode | Fully non-blocking cross-point routing of nearly any size I/O array – only limited by size of 10GbE switch |
| Video Wall Mode | Supports Advanced Video Wall displays using integrated scaling engine in the RX. Supports asymmetric walls with crop, scale, and letterbox modes |
| MultiViewer Mode | Supports customizable MultiViewer displays with up to 32x sources using integrated scaling engine in the TX |
| Point-to-Point Mode | Supports Point-to-Point Extension up to 328 ft. / 100 meters (CAT6A) or 18 miles / 30 km (single-mode fiber) using recommended cables and SFP+ modules |
| Power | |
| Typical Power Consumption | 13.5 watts |
| External AC Power Adapter | Input: 100–240VAC, 50–60Hz / Output: +12VDC @ 2.5A |
| Power-over-Ethernet | Supports PoE+ (802.3at) over the 10GbE RJ-45 connector. Unit may be used with either optical or fiber network connectivity with PoE+ power source |
| DC Power Output | 2.5 watts – 5VDC @ 500 mA on HDMI pin 18 |
| Mechanical | |
| Construction | Heavy-duty steel enclosure with jet black finish |
| Dimensions (H x W x D) | Each Unit: 0.85" x 8.1" x 5.3" (21.7 mm x 204.4 mm x 134.5 mm) |
| Weight | Each Unit: 1.53 lbs. (692 g) |
| Environmental | |
| Operating Temperature Range | +32° to +104° F (0° to +40° C) |
| Maximum Case Temperature |
Top of Case:
Bottom of Case:
TX or RX Mode: 110°F (43° C)
TX Mode: 117° (47° C) / RX Mode: 134° F (57° C) |
| Storage Temperature Range | -2° to +140° F (-20° to +60° C) |
| Operating / Storage Humidity | 10% to 90% (non-condensing) |
| Regulatory Approvals | |
| TX / RX Unit | FCC, CE, RoHS, REACH |
| External AC Power Adapter | CE, GS, UL, cUL, DOFT, CCC, TUV, PSE, KCC, CB, RoHS, REACH, WEEE |
| Warranty | |
| Limited Warranty | 3 Years Parts and Labor |
| Model Numbers | |
| DN-300 | DisplayNet SDVoE Transmitter / Receiver |
| DN-300H | DisplayNet SDVoE Transmitter / Receiver USB HID |
| DNS-20 | DisplayNet Server Rack-mountable Linux Server with DisplayNet API and DisplayNet Manager® software |
| Accessories | |
| Included | 1x External AC Power Adapter (per unit) 2x Mounting Brackets with Screws (per unit) 1x 4-pin RS-232 Phoenix Connector (per unit) 1x IR Transmitter 1x IR Receiver |
Optional | DisplayNet Server (Model DNS-20)(5) External AC Power Adapter with USA, Euro, UK, or Australia Plugs Power Distribution Unit, 8x 12VDC (DVI-7520-PDU) IR Transmitter (DVI-7360-IR-TX), IR Receiver (DVI-7362-IR-RX) 1U Rack Mount Kit for 1-4 units (DN-300-RMK) 6U Vertical Rack Mount Kit for 1-10 units (DN-300-RMKV) DVI-I Female to HDMI Male Adapter Cable (DVI-8511c) |
Note 1: The 10GbE port is designed to connect to compatible DVIGear products and 10GbE network switches only. Do not connect any device to the 10GbE port of this product unless you are sure it is compatible.
Note 2: Video signals will be transported uncompressed unless the bandwidth exceeds the limits of 10GbE. For video signals that exceed 10Gbps. of bandwidth, light compression is employed. For the maximum resolutions shown above, the DN-300 Series employs a compression ratio of about 1.4:1.
Note 3: DN-300 Series uses lightweight compression for some high bit rate formats (e.g. 4K /60p), which adds a few extra lines of latency. For Fast Switch, Video Wall, and MultiViewer modes, a maximum of 2 frames of latency translates to not more than 33.3 msec. @ 60Hz and not more than 67.7 msec @ 30Hz.
Note 4: A system may operate concurrently in Matrix Switching, Video Wall, and MultiViewer modes.
Note 5: The DisplayNet Server is required for the majority of system configurations.
All specifications are subject to change without notice.
