DisplayNet Logo

DisplayNet DN-150 Series

DisplayNet® DN-150 Series

Models

  • DN-150F-TX: Transmitter
  • DN-150F-RX: Receiver
  • DN-150F-TX: Transmitter
  • DN-150F-RX: Receiver

Pricing: Call for a quote or demo

 




DisplayNet®
DN-150 Series Overview

Unprecedented Value – The DisplayNet DN-150 Series represents a breakthrough in performance and value for IP-based AV signal distribution applications. The DN-150 Series utilizes SDVoE technology in a fanless, low-profile case that can be mounted unobtrusively nearly anywhere. Based on the latest SDVoE standard, the DN-150 Series delivers unconstrained scalability, fast switching, zero frame latency and zero artifact image quality, while distributing signals with resolutions of up to 4K/60p (4:4:4) with 8-bit color, or 4K/60p (4:2:2) with 10 or 12-bit color. Like other DisplayNet products, these units provide independent multi-layer routing of HDMI audio and video signals, as well as IR, RS-232, Analog Audio, and 1GbE.

Exceptional Versatility – The DN-150 Series relies on the highly intuitive DisplayNet Manager® user interface that makes set-up and maintenance of these units incredibly fast and easy. Advanced features in this web-based application enable nearly effortless integration with third-party controllers. Full interoperability with other SDVoE products, including the DisplayNet DN-200 Series, greatly enhances system flexibility. The DN-150 Series utilizes optical fiber 10GbE transport, enabling signal extension distances of up 30 KM (18.6 miles) using single-mode fiber.

Features
  • Next-generation AV signal distribution with Zero Artifacts and Zero Frame Latency
  • Supports resolutions of up to 4K /60p with 8-bit color (4:4:4) or 4K /60p with 10 or 12-bit color (4:2:2 or 4:2:0)
  • Independent multi-layer routing for HDMI Video, HDMI Audio, Analog Audio, RS-232, IR, and HDMI-CEC commands.
  • Highly Scalable – supports systems from a few ports to hundreds – limited only to the size of the network switch
  • Long Range – Supports up to 30KM (18.6 miles) using single-mode optical fiber
  • Fully HDCP 2.2 and 1.4 compliant
  • Compatible with SDVoE-compliant transmitters and receivers, including DisplayNet DN-200 Series.
Benefits
  • Leverages decades of proven networking technology and massive global deployment of 10GbE networks
  • AV assets no longer need to be aggregated at a central location using an expensive AV Matrix Switcher
  • Eliminates the need for costly, redundant AV networks as all AV assets can now reside on existing IT networks
  • Enables IT Managers to easily manage and distribute AV assets within corporate network environments
  • 10GbE network switches can be up to 60% smaller than typical AV switches and up to 1/10th the cost
  • Scalable – system array limited only by the number of installed endpoints and size (ports) of 10GbE switch
  • High-speed uplinks on many 10GbE switches allow increased port capacity without obsoleting existing hardware
  • Embedded Local Management – DisplayNet auto-configures all connected devices even in the most complex networked systems, thus eliminating the need for complicated network switch configurations
  • Interoperability with all SDVoE-compliant devices and control systems
  • Most DN-200 Series features supported when using DN-150F-TX and DN-200 Series RX
Supported AV Signals
Video HDMI 4K /60p, DVI 1.0
HDCP Compliant with HDCP 1.4 and HDCP 2.2
Embedded Audio Supports pass-through of embedded HDMI audio including up to 8 channels of LPCM or HBR audio formats such as: Dolby TrueHD, and DTS-HD Master Audio
De-Embedded Audio Supports independent routing of de-embedded HDMI audio: Up to 8 channels of LPCM digital audio with up to 24-bit depth and 192 kHz sampling rate
Downmixed Audio Supports independent output of de-embedded, downmixed 2-channel HDMI audio from DN-200 Series transmitter
External Audio Supports independent routing of analog stereo audio stream with up to 24-bit depth and a fixed 48 kHz sampling rate
Audio-over-IP Supports networked audio pass-through using 1GbE port
Ethernet Built-in 1GbE Ethernet switch on all TX and RX units supporting 10 Mbps. up to 1 Gbps
IR Control Supports bidirectional IR pass-through
RS-232 Control Supports bidirectional RS-232 pass-through UART interface with to 115,200 baud
SDVoE Interoperability Fully compatible with all SDVoE-compliant transmitters and receivers, including DisplayNet DN-200 Series
Connections / Indicators
10GbE Port (1) 1ea. SFP+ Module on DN-150F Series
HDMI Input / HDMI Output 1ea. 19-pin Female HDMI connector
Analog Stereo Audio 1ea. 3.5mm Stereo-Mini Jack (Input / Output on TX and Output on RX)
1GbE Port 1ea. shielded RJ45 connector with LED indicators
RS-232 1ea. 4-pin, 3.5mm pitch, Phoenix connector
IR Control 1ea. IR IN: 3.5mm Stereo Mini-Jack; 1ea. IR OUT: 3.5mm Mini-Jack
DC Power 1ea. 5.5 mm / 2.0 mm female screw-locking connector
Diagnostic LEDs TX Link, RX Link, Video, Power
Hardware Reset 1ea. Push-button to restore factory default values
Performance
Supported Resolutions (2) Up to 4K /60p with 8-bit color (4:4:4)
Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0)
Maximum Pixel Clock Freq. Supports pixel clock rates up to 600 MHz
Maximum Video Bit Rate Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. total
Switching Layers Independent switching layers for all connected Video, Embedded Audio, Analog Audio, Downmixed Audio (output only), RS-232 and IR
Video Signal Latency (3) Genlock Mode: ≤ 30 µsec. (uncompressed), ≤ 120 µsec. (compressed) (3)
Supported I/O Switching Array Size of I/O array is limited only by the size (number of ports) of the 10GbE network switch
Maximum Cable Distance up to 18.6 miles (30 KM) with DN-150F optical version
HDMI Input Cable Equalization Supports DVIGear's HR™ Series HDMI with cable lengths up to 10 meters at 4K /60p resolution
Operational Modes (4)
Matrix Switching Mode Fully non-blocking cross-point routing of nearly any size I/O array – only limited by size of 10GbE switch.
Video Wall Mode DN-150-TX devices may be used with DN-200 Series RX devices in Video Wall mode
Point-to-Point Mode Supports Point-to-Point Extension up to 328 ft. (100 meters), or up to 18.6 miles (30 KM) with DN-150F optical version
Power
Typical Power Consumption DN-150F-TX: 13.6 watts / DN-150F-RX: 15.6 watts
External AC Power Adapter Input: 100-240VAC, 50-60Hz / Output: +12VDC @ 2.0A
Mechanical
Construction Heavy-duty steel enclosure with jet black finish
Dimensions (H x W x D) Each Unit: 1.0" x 6.3" x 6.8" (25.5 mm x 160 mm x 173 mm)
Weight Each Unit: 1.7 lbs. (0.77 kg)
Environmental
Operating Temp. (Environment) +32° to +104° F (0° to +40° C)
Typical Case Temperature Top Case: 107.6° F (42° C)
Bottom Case: 140.0° F (60° C)
Storage Temp. (Environment) -4° to +158° F (-20° to +70° C)
Operating / Storage Humidity 10% to 90% (non-condensing)
Regulatory Approvals
TX / RX Units FCC, CE, RoHS
External AC Power Adapter FCC, CE, UL, C-UL, CEC, TUV, GS, PSE, CCC, RoHS, WEEE
Warranty
Limited Warranty 3 Years Parts and Labor
Model Numbers
DN-150F-TX / DN-150F-RX DisplayNet SDVoE Optical Transmitter / DisplayNet SDVoE Optical Receiver
DNS-20 DisplayNet Server®: Rack-mountable Linux PC with DisplayNet API and DisplayNet Manager® software pre-installed
Accessories included
Included 1x External AC Power Adapter (per unit)
2x Mounting Brackets with Screws (per unit)
1x 4-pin RS-232 Phoenix Connector (per unit)
1x IR Transmitter (per TX unit)
1x IR Receiver (per RX unit)
1x USB Flash Drive Loaded with: Hardware Manual, Software Manual
Optional DisplayNet Server® (model DNS-20) (5)
External AC Power Adapter with USA, Euro, UK, or Australia Plugs
Power Distribution Unit, 8x 12VDC (DVI-7520-PDU)
Spare IR Transmitter, IR Receiver
19" Rack Mount Kit (DN-100-RMK)
DVI-I Female to HDMI Male Adapter Cable (DVI-8511c)

Note 1: The 10GbE port is designed to connect to compatible DVIGear products and 10GbE network switches only. Do not connect any device to the 10GbE port of this product unless you are sure it is compatible.

Note 2: Video signals will be transported uncompressed unless the bandwidth exceeds the limits of 10GbE. For video signals that exceed 10Gbps. of raw data, light compression is employed. For the maximum resolutions shown above, the DN-200 Series employs a compression ratio of about 1.4:1.

Note 3: DN-150 Series uses lightweight compression for some high bit rate formats (e.g. 4K /60p), which adds few extra lines of latency.

Note 4: A system may operate concurrently in Matrix Switching and Video Wall modes.

Note 5: The DisplayNet Server is required for matrix switching operation. Please see the DisplayNet DN-150 Series Hardware Manual for details on the DisplayNet Server    specifications, installation, and use.

All specifications are subject to change without notice.

Data Sheet

dn-150 Series Data Sheet

Download >
DN-150F Series
Technical Drawing
DN-150F Series Technical Drawings Download >
DN-150F Series
Mounting Bracket
DN-150F Series Mounting Bracket Download >